You can now pre-order the Todd Guiness and Tokamak Rovsky coloured Robot Damashii Dunbines via Bandai’s online premium shop. These are shortlived units from Aura Battle Dunbine, leaving only Show Zama’s iconic mauve Dunbine to hold out for the remainder of the series. Whilst we already bought the other Robot Damashii aura battlers we may pass on these but it’s pretty cool that Bandai are at least doing toys of them. Buying both toys will cost you 8,400 yen and they will be released in April of next year.

Now that the Robot Damashii Dunbine is in the wild, Bandai have created a rather wonderful page for their new Aura Battler toys. Showing the previously released Billbine as well as the forthcoming camo-coloured Billbine too. Not to mention the wing calibur attachment has been revealed in detail finally. What’s especially lovely about this toy though, despite the fact we love Aura Battler Dunbine, is that people like Hidetaka Tenjin have been posting pictures of the toy squaring off against cats. In any case, the toy does look lovely and we can’t wait to get ours in the post.

Bandai have announced the later alternate colour version of the Billbine as one of their premium online shop only items. Pre-orders start today and the toy will be released in February of next year. Costing 4,275 yen it’s in the same price range as the original, though if you can find the latter at that price then good luck (as it’s already pretty rare now). If you live outside Japan then getting a hold of this will be a bit tricky but we will be nabbing one for sure. As “upgrades” go in anime, the alternate colour for Billbine didn’t actually do that much. Rather it was the supposed result of field maintenance and parts replacement during the extended battles back on Earth. Personally, we prefer the original colour scheme but the dark blue and green colours do make it look pretty tough.

Whilst it was recently revealed at this year’s Wonder Festival, Kotobukiya have officially announced the release of a truly gorgeous 1/100 scale Metal Gear Rex kit in December of this year. This is not to be confused with the huge and hugely expensive threeA toy, as this kit is smaller and costs a lot less (as well as needing to be assembled and painted obviously). The sculpt also looks spot on and for the money this is something I’d rather have over the threeA toy, as the latter has no diecast to speak of (which at that price is fucking disgraceful). As always, you can pre-order the kit here for a very reasonable 6,240 yen.

Well, we now know how much the forthcoming 1/60 scale VF-4G Lightning III will cost. That of an eye watering 26,985 yen. In addition, this will only be available to purchase via Yamato’s online shop. Whilst the toy will be released sometime this December, orders will be opening up later this August. Despite the price tag, we will be getting this as we’ve always loved the VF-4 and this toy looks to have a really remarkable sculpt.

Update: Yamato are now taking orders here.

At this summer’s Wonder Festival, Sentinel have definitely revealed something rather cool in their increasingly awesome Riobot toyline. That of the mighty Blodia (pictured above) from the classic arcade game, Cyberbots. The mecha was also featured in the Cyberbots sequel Kikaioh as well, though as a slightly pimped up unlockable. If that wasn’t enough, Kotobukiya are also apparently releasing a kit of Metal Gear Rex as well. Though, Sentinel still steal the show for us as the recent reveal that the exquisitely designed Tsugumori from the Knights of Sidonia manga (by the simply brilliant Tsutomu Nihei) will be also getting the Riobot treatment. If you want to peruse the rest of the Wonder Festival coverage, then have a look here and here.

Over at the Yamato website they’ve announced a pre-order bonus for the forthcoming 1/60 scale VF-4G Lightning III toy. If you’re a normal member of the public you’ll get a 5% discount but if you’re a Yamato Fanclub member you’ll also get an additional 5% discount (amounting a nice total of 10% in all). The deadline for all the pre-orders is midday on the 30th July. Whilst the price point still isn’t determined what is more worrying is that Yamato are using this pre-order setup to gauge demand. So if they’re aren’t enough pre-orders we won’t even get this toy. If you’re curious as to how the development of it has gone thus far, then have a look here. It looks really quite lovely and there’s clear diecast in the joints too (this being a very good thing obviously). Either way we’ve got our fingers crossed for this one as we want it bad.

As we mentioned previously, the positively regal Billbine will be receiving a Robot Damashii toy this July. Even more wonderful is the fact that Dunbine will also receive similar treatment later this year. For long time readers of this site you’ll know we seriously wub Aura Battler Dunbine and these toys are just exquisite. The fact we’re also getting a Dunbine and one of this quality is really fantastic as far as we’re concerned. In any case, this Dunbine toy will be out in October of this year and will cost 4,410 yen.

This year’s Shizuoka Hobby Show is now in full swing. Among the many new items shown, with a mention of a Kagekiyo kit being pretty cool, is the reveal of Yamato’s next 1/60 scale variable fighter toy. Specifically that of the VF-4G Lightning III. The mecha itself has an interesting history, as it was originally (though very briefly) shown as a toy in the original Macross TV series. A more substantial display was then later included within Macross Flashback 2012. In both instances though the mecha was only shown in fighter mode. For years this produced all manner of speculation as to its transformation sequence, as well as what the battroid mode would actually look like. In 1995 the questions were answered as the variable fighter was featured (fully transformable) in Macross Digital Mission VF-X. Whilst the game was a steaming pile of bobbins (despite having a damn sexy intro) it did at least lay much of the fan inquiry to rest. Since then, the VF-4 has been a staple of pretty much every Macross game since. All that aside though, it’s one of our favourite designs from Macross and we’re so very happy that Yamato are doing the decent thing and making a toy out of it. No word or pricing or release date as yet but considering that the VF-4 was operationally rolled out in the Macross timeline around September 2012, expect Yamato to try and hit that date. Yamato also have a very nice page detailing the toy’s engineering in regards to its transformation. If you want to have a look at the rest of what the hobby show has on offer, then feast your eyes on this, this and this.

For those that buy the first release of the forthcoming Macross Do You Remember Love BluRay Hybrid Boxset, they’ll also get a nice PSN download code for the original PSone shooter. Originally released on the Saturn and then ported to the PSone, it was actually a pretty damn good shoot-em-up and we very much enjoyed blasting our way through it back in good old 1999. It even came with demos for Macross VF-X2 and Patlabor: Game Edition. What was very notable about the game however was its use of some lovely reanimated cutscenes (as produced by Gonzo).

There’s also a pretty cool exhibition going on in Shibuya, Tokyo regarding Macross. Starting today and running until May 13th, tickets cost 500 yen each (400 yen if you’re a student and free if you’re a kid at elementary school) and it covers pretty much the whole gamut of the saga. If you’re in the area, then check out the Parco Museum page about the event for more details.

In addition to this news is the fact a lovely 5 minute HD promo for the BluRay was released yesterday (shown below). Voiced by non-other than Mika Doi (of Misa Hayase fame), the promo also has footage of the game in action too (around the 3:25 mark). Don’t forget you can still pre-order the pretty damn awesome boxset here.